7500 DVI Series
Ideal Applications:
Digital signage, broadcast or corporate studios,
auditoriums, stadiums and theaters, airport or
transportation hubs, distance learning, surgical
or medical imaging and more!
DVI up to
1920x1200 &
Stereo Audio
DVI transmission (up to 1920x1200) and stereo audio
over one single mode or multimode fiber without
compression, scaling or adjustments.
Signal
DVI to
WUXGA
Audio
Channels
1
2
Direction
x
Bo r
o d
Car
Features
Transmits single-link DVI (640 x 480 up
to 1920 x 1200 - 165 MHz pixel clock)
Supports HDTV resolutions of 480p,
720p, 1080i and 1080p (DVI format)
Uses no compression, color space
conversion or scaling for crystal clear
signals
Only one fiber used - no pixel skewing
7500 Tx
Fiber
Cable
Supports up to 45 foot (13.72m) DVI
input cable
7501 Rx
DVI Video Displays
with Stereo Audio
DVI Input loop-through on transmitter
Supports EDID from loop-through or
internal emulation from Transmitter
Multimode version also supports
EDID capture and storage
Fiber Cores
1
1
2
1
N/A
DVI Loop-thru
Monitor
Ordering Information
Part Number
7500-xyS
7501-xyS
7502-x1S
7500-KIT-pp*
Description
Transmitter
Receiver
Transmitter, Dual MM Optical Outputs
Complete 7500 Series Kit
Requires no adjustments, equalization
or de-skewing during installation
Advanced input circuit equalizes and
re-clocks noisy and distorted DVI input
signals
Two DVI outputs on box receiver
allows for driving two monitors
Transmits signals over one fiber using
advanced CWDM multiplexing
Low audio/video skew, <300 uSec
RoHS Compliant
PDPS-1-pp
Power Supply
*7500 Complete Kit Contents:
Qty
1
2
1
1
Part Number
7500-B7S Transmitter (SM only)
PDPS-1-pp (specify line cord)
126216 - 6ft., DVI (M) to DVI (M)
Qty
1
1
2
Part Number
7501-B7S Receiver (SM only)
122960 - 250 Meter SM Fiber
ST Connectors, pull hook
1214 - 6ft., 3.5mm to 3.5mm
stereo audio cable
1213 - 3.5mm to 2 RCA (M) stereo audio cable
EU - Europe
Sales
Power Supply Suffix Codes (pp) for AC Line Cord:
NA - North America
AU - Australia
JP - Japan
UK - United Kingdom
Part Number Suffix Codes:
x:
B
Box Version
C
Card Version
y:
1
7
850 nm Multimode (MM)
1310 nm Single Mode (SM)
631-273-0404 | commspecial.com
info@commspecial.com
  Communications Specialties - Fiberlink 7500 DVI Series Datasheet
Video Specifications
Input Type
Number of Video Channels
Video Processing
DVI Input Loop-through
EDID (DDC) Support
DVI-D or DVI-I (digital signal only )
single link
1 single-link DVI-D up to 1920x1200
24 bits, no compression or scaling
Yes; both box & card versions
SM: from loop-through or internal
MM: from loop-through, internal
or capture & storage capability
25 - 165 MHz, continuous
Progressive or Interlaced
RGB or YPrPb
45 Feet (13.72m)
16 Feet (5m)
2 on box version, 1 on card version
850 MM
Dual Optical
Output Version
0-4
7500 DVI Series
Pixel Clock Range
Scanning System Supported
Color Space Format Supported
Maximum Input Cable Length
Maximum Output Cable Length
Number of DVI Outputs
Operating Loss Budget
& Maximum Usable Distance
*
Wavelength Loss(dB) Distance (km)
1310 SM
850 MM
0-15
0-8
15
0.75 (50u)
0.35 (62.5u)
0.60 (50u)
0.30 (62.5u)
Audio Specifications
Number of Audio Channels
Frequency Response
Bits-per-Sample/Sampling Rate
Maximum Audio Level
SNR (A-Weighted)
THD+N
Channel Phase Differential
Crosstalk
Input Impedance
Output Impedance
Audio to Video Diff. Delay (skew)
2, unbalanced
+0/-0.5 dB, 20 Hz - 20 kHz
24 bits; >48 kHz
+10 dBu
100 dB
0.001%, 20 Hz - 20 kHz
+0.1
o
100 dB (1 kHz)
>24K Ohms
< 1 Ohm
300 uSec
SM = Single Mode Fiber
MM = Multimode Fiber
*Distance specifications are only approximate and are not
guaranteed. Operating loss budget must not be exceeded.
General Specifications
LED Indicators
Power Requirements*
Operating Temperature Range
Optical Connector
Operating Wavelength
Physical Size
Weight
Slots filled in 6000A Card Cage
*For operation from 95-250 volts AC, 50/60 Hz, a PDPS-1 plug-in adapter is required.
Backed by a 30-day satisfaction
guarantee and a three-year limited
warranty on parts and labor.
See website for terms and conditions.
Power, Video, Audio,
Alarm LED (card version only)
9-24 volts AC or DC, 10 watts
-20
o
C to +45
o
C
7500/7501: ST x 1 7502: ST x 2
SM: CWDM (1300-1600nm band)
MM: CWDM (850nm band)
6.5 W x 1.15 H x 8 L (inches)
165 W x 29 H x 203 L (mm)
1 lb. (0.455 kg)
3
UPDATED 2/6/2009
All specifications subject to change without notice. © 2009
Pure Digital Fiberlink and the starburst logo are registered trademarks
of Communications Specialties, Inc. CSI and the triangle designs
are trademarks of Communications Specialties, Inc.
Sales
631-273-0404 | commspecial.com
info@commspecial.com
 Untitled Document
Learn more about Pure Digital Fiberlink® Fiber Optic Transmission Products for Video, Audio and Data!
Learn more about Scan Do® Scan Converters
Learn more about Deuce® Video Scalers
Visit Communications Specialties Website